Vividsun Solution Welding Flux-Cored Rods

£14.99 £29.98

Trust badge

Why Welders, Mechanics, & Household Handymen are calling Solution Welding Rods"TheStrongest, Fastest, and Easiest Aluminum Fabrication or Parts Repair_ no expensive equipment required.

Does The Impossible.

Makes a sound joint with slight penetration to base metal that is stronger than mild steel. Join thick or thin parts with a 45,000 lb tensile strength.

Extreme Performance. By Design.

Solution Welding Rods areengineered to easily flow under a very low working temperature to ensure fast application to your project with minimal distortion.

From Amateur To Pro.

Regardless of your prior experience, anyone can weld aluminum without the need for expensive equipment like welding machines. All you need is a simple propane torch and some easy welding rods.

Welding Instructions:

  • 1. Thoroughly clean the area you’re about to weldby brushing the base with stainless steel brush until it becomes shiny.
  • 2. Thenevenly heat the area to be welded.
  • 3. As you heat,rub the rod vigorously against theheated area until the rod starts flowing.
Caution: Never apply heat directly to the rod as it will crumb,and if you manage to melt the rod directly, the weld will be easily breakable.Remember, melting the rod directly is a wrong way, and makes crumby welds.

"I am writing to you because I used your product and was amazed immediately. I had never welded aluminum and these are photo and crude stress test on the tubes I welded. If you look close the lower square tubes bent and the weld did not even crack when I was hitting other tube with a hammer. Also has high stress on bonding point. Thanks I have save a ton of money on fixing other items and since then I am welding large items and making nice looking welds.

Tacho Coronado

Just afewof the many parts that can beeasilyrepaired!

Aluminum Heads
Fuel Tanks
Cast Iron Heads
A/C Lines
Truck Beds
Transmission Cases
Pot Metal Parts
Irrigation Pipes
Condenser Lines
Industrial Parts
Aluminum Molds
Truck Beds
Timing Covers
Complete Fabrication
Tool Boxes
Aluminum Boats
Cavitation Plates

Product Benefits:

    • The easy-to-melt weldingrods are high-quality special rods that are mainly used for welding / brazing aluminum and aluminum alloys. However, they can also be used for hard welding non-ferrous metals other than stainless steel.
    • Recommended for welding aluminum alloys: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005 and cast alloys 710.0 and 711.0
    • Applications include cargo areas, loading ramps, docks, diamond plates, irrigation lines, engine blocks, gearboxes, etc.
    • Prepared for small repairs. For repairs that would compromise saety if they are not repaired, we recommend replacing the parts completely instead of repairing them.


      • Material: aluminum

      • Melting temperature:<480 ° C (896 ° F)
      • No leakage of gases or toxins, no lead material included.
      • Excellent corrosion resistance
      • Minimize the distortion of the starting material during welding.
      • Size: 50cm x 1.6mm. (According to themanual measurement, there may be a subtle deviation.)

      Package Includes:

      • 10 PCs/ 30 PCs/ 50 PCs
      Return & Warranty
      • 100% Secure payment with SSL Encryption.
      • If you're not 100% satisfied, let us know and we'll make it right.
      Shipping Policies
      • Orders ship within 5 to 10 business days.
      • Tip: Free shipping for all orders over £19.99